Tsurumi Pumpak KS801 Surface Water Pump Flood Kit

Tsurumi Pumpak KS801 Surface Water Pump Flood Kit Details

The KS801 is a self-priming pump with a plastic body, venturi and impeller. The stainless steel shaft is fitted with a carbon ceramic and NBR mechanical seal and the A.C., TEFV, IP44 motor is fitted with an on/off switch and has overload protection.

It is designed for pumping clean water only, at a maximum temperature of 35°C. It should not be allowed to run dry, but by fitting an optional pressure controller it can be protected from this and also start and stop automatically.

Maximum recommended suction lift, when primed, is 7 metres. For best results we recommend that a foot-valve and strainer should be fitted to the end of the suction hose. This is included with our 4 metre and 7 metre suction kits.

These are available as an optional extra and include a pump coupling which is factory fitted to the hose for a vital, airtight connection. Fitted as standard with a carrying handle and a 2 metre H07RN-F rubber power lead. This pump is ideal for transfer and irrigation duties in domestic and light industrial applications.

Specifications

Max Flow Rate: 60L/min
Motor 800w
Max Head: 42m
Dimensions L235x W385x H290
Dry Weight: 7.5kg
Discharge : 1 " ( 25mm)
inlet:: 1" (25mm)

Specification

Brand	Tsurumi
Weight	7.5kg
Warranty	1 year

Need Help?
Delivery

Need Help?

There are 3 easy ways to find out more about this product:

1. Call our Sales Team on 01263 820202
2. Send us a message
3. Request a 'Call Back' by filling in the form below.
We will try to return all call-back requests up to 5.00pm weekdays. No call-backs at the weekends or bank holidays. After which time, we will call you back the following day.