Delivery is free of charge to most of the UK mainland* for orders over £50.00**.
* Scottish Highlands, Offshore UK & Republic of Ireland
If you're ordering to the Scottish Highlands, an offshore UK address or to the Republic of Ireland additional charges may apply. To receive a quote for these costs along with estimated delivery times, please contact us stating your address and the items you would like to order. You can still place your order through the website without receiving a quote but we will be in touch after the order has been placed to confirm delivery costs.
*The following Scottish and offshore postcodes may incur an additional delivery charge:
**Orders under £50.00 will incur a shipping charge of £5.95. Our full delivery policy is here.
If your order is subject to any additional shipping charges, we will contact you (via email or telephone) prior to processing your payment.
For more information call our sales team on 01263 820202
Tsurumi Dehydro 1 Flood Prevention Kit Details
A Dehydro is an emergency pumping kit which has a powerful pump, 2x packs of Flood Sax Door and discharge hoses for defending a property from flooding. Depending on which kit is selected, the pump is designed to pump water levels down to a level of between 3mm and 1mm. Hoses are light and easy to position and feature quick connections to enable fast deployment in an emergency. Supplied in a sturdy easy-carry case, there is sufficient space within to not only store the pumping equipment, but keep other flood protection products e.g. emergency grab bags, emergency meals etc.
DEHYDRO 1 Details
Includes 1x BPS100, 230 volt submersible pump. This has a 100watt motor, weighs 2.5kgs (dry) and is supplied with a quick release hose connector, 10 metres of power cable and a plug for immediate use. It will pump approximately 40 litres per minute across 30 metres of level ground when using 25mm (1”) hose. No initial priming required before starting, it will pump water down to 3mm, but it must not run dry. . Ideal for use with a generator or mains power (when connected and safe to use).
The BPS series, in thermoplastic, are designed for clean and slightly dirty water. The top discharge design makes them suitable for partial immersion applications and where space or access is restricted. , The BPS-100 has a stainless steel shaft, with a carbon/ceramic mechanical seal, in an intermediate oil chamber, with an inner lip seal. This construction offers good wear resistance and protection in the event of short periods of dry running. The BPS-100 is fitted with a residue strainer which enables the pumping of water down to 3mm. This pump offers excellent reliability in domestic, trade and industrial applications, where high quality of construction at a low price is required. Supplied with 10 metres of heavy duty rubber power cable.
- 1x pump: BPS100
- 1x Phase 1 hose kit: 10 metres of 25mm (1”) non-kink hose c/w quick release connectors - For pumping near the property e.g. over window ledges, steps, walls, FloodSax, sandbags etc.
- 1x Phase 2 hose kit: 10 metres of 25mm (1”) lay-flat hose c/w quick release connectors - For pumping over flat surfaces e.g. over ground, away from the property.
- 2x Floodsax Door: 2x door strip FloodSax and 8x FloodSax Regular.
- 1x Easy carry case: including 1x lid and 2x fastening straps with ABS clips.
- Model: BPS100
- Manual: Yes
- Outlet: 25mm
- KW: 0.1
- Voltage: 230V
- Flow rate: 70
- Head: 6.5m free passage: 3mm
- Dimensions (mm): L X 134 W x155 x H250
- Weight: 2.5kg
You may also be interested in the following product(s)
RRP: £1,194.00 £1,075.00 INC VAT
RRP: £1,638.00 £1,474.00 INC VAT
RRP: £2,707.00 £2,436.00 INC VAT
RRP: £3,998.00 £3,589.00 INC VAT
Write Your Own Review
Please note: These are strictly product reviews. Any other reviews will not be listed here.