|
The SDMO R10C Power Box is certainly compact it has been designed primarly for use in site cabins where workmen can draw power for their cabin use.
| Specifications |
| Frequency |
50 Hz |
| Voltage |
230V Single Phase |
| Socket(s) |
1 X 63 Amp |
| Power PRP : |
9 kVA |
| Wattage Rating |
7.2 kW |
| Fuel capacity : |
44 litres |
| Run Time |
17 hrs @ 75% load
21 hrs @ 50%load |
Dimentions |
1150mm X 804mm X 1155mm |
Noise level @ 75% load
|
62 dB @7m |
| Engine Features |
| Manufacturer / Model |
Mitsubishi S3L2-SD 4 stroke |
| Cylinder Arrangement |
In line |
| Displacement |
1.31L [79.9C.I.] |
| Bore and Stroke |
92mm X 78mm |
| Compression Ratio |
22 : 1 |
| Rated RPM |
1500 Rpm |
| Piston Speed |
4.6m/s [15.1ft./s] |
| Max standby power |
11.33kW [15BHP] |
| Frequency reg @ steady state BMEP |
+/- 2.5% |
| BMEP |
6.24bar [90psi] |
| Governor : Type |
MECA |
| Exhaust System |
| Exhaust Gas Flow |
36.5L/s [77cfm] |
| Exhaust Temperature |
400°C [725°F] |
| Max back pressure |
700mm CE [28in. WG] |
| Fuel System |
| 100% (of the prime power) |
3.1L/h [0.8 gal/hr] |
| 75% (of the prime power) |
2.5L/h [0.7 gal/hr] |
| 50% (of the prime power) |
2.1L/h [0.6 gal/hr] |
| Max Fuel pump flow |
18L/h [4.8 gal/hr] |
| Oil System |
| Total oil capacity with filters |
4.2L [1.1 gal] |
| Oil pressure low idle |
0.5 bar [7.2psi] |
| Oil pressure rated RPM |
4 bar [58.0psi] |
| Oil consumption 100% load |
0.018 L / h [0.0048 gal / hr] |
| Oil capacity carter |
3.7L [1.0 gal] |
| Coolant System |
| Radiator & engine capacity |
4.2L [1.110 gal] |
| Max water temperature |
111°C [232°F] |
| Outlet water temperature |
93°C [199°F] |
| Fan Power |
0.3 kW |
| Fan air flow without restriction |
0.5m3/s [1060cfm] |
| Available restriction on air flow |
10mm CE [0.4in. WG] |
| Type of coolant |
Gencool |
| Thermostat |
82-95 °C |
|
Adjustable earth
protection |
Battery isolator
switch |
NEXYS Panel |
Heavy duty
air filter |
 |
 |
 |
 |
|
