Diesel oil welding set with electric start - Worksite without electricity

Essential for welding on construction sites where electricity is not supplied, WELDARC welding sets are pratical, easily transportable and operational in record time . They can also be used as auxillary generating sets for the supply of electricity.

---

Specifications:

Specification	SV 180 4DE-2
Welder Output Settings	50 to 180A DC
Power Output kVA	4
Volts	230
Normal welding rate 35% (A)	180A
Intensive welding rate 60% (A)	145A
Maximum Starting Current	75V
Type of current	Direct
Nominal	25V
Engine Type	Yanmar Diesel L100
Start Type	Electric Start
Fuel Type	Diesel
Fuel Capacity (L)	26 litre
Oil Capacity (L)	1.65 Litre
Run Time at 50% Load	20 Hrs
General Specifications
Weld Rod Diameters (mm)	1.6 to 4mm
Rod Types	Rutile & All Types
Weight (kg)	200
Dimensions LxWxH	915 x 790 x 1125
Noise Level LwA dBa at 7m	97 74
Low Oil Shutdown	Yes

R10 Welding Kit compromises of : 2 x 5m cable, 1 earth clip,
1 electrode holder, 1 hammer, 1 brush and 1 mask

longlife' engine Economic large autonomy electric start Trolley kit in standard

LOW ENGINE OIL SAFETY: With this feature, not only does the engine start and stop with a simple turn of the key but, more importantly, it will not start (and will stop of its own accord if running) if the oil level is too low. Your generator set is fully protected!

Alternator specifications:
Type: With ring and brush
Régulation: Mecanical
Protection class IP 23
Insulation class Class H

Sockets and panel
1 x 10/16A 230V domestic - circuit breaker r – hour meter – Emergency stop – warning light + Mics MODYS(2)

List Price	£3335.00 inc vat
SV1804DE-2 Our Price inc vat & delivery	£2599.00
SV1804DE-2 Inc R10 Welding Kit Our Price inc vat & delivery	£2699.00