
Power Transfer System: Connect Your Generator To Your home
Connect
your generator to your home using the TS 9201M Transfer Switch..
Why
not use your generator to its full potential, a
Power Transfer Switch is easily installed by a qualified
electrician, enabling you to have instant power in the event
of mains power failure. This unit is built to the highest
standards, incorporating the latest technology available
Question : I have bought a generator, and would like
to connect it to my house in case of mains failure. What
do I need to do?
- Answer
: When using a generator as an alternative supply
to the mains, there are several precautions that must
be observed.
- It is vital that the generator is completely isolated
from the mains supply. This ensures that the generator
is not attempting to power up the whole neighborhood,
but also ensures that it does not electrocute a utility
worker trying to restore the mains supply.
- To
achieve this, a double-pole, break-before-make, changeover
switch must be installed by a qualified electrician.
The Briggs & Stratton manual transfer switch is
ideal for this application.
- This
should be fitted between the electricity meter and the
building consumer unit. The switch connects the building
to either the mains supply or to a lead which can be
plugged into the generator.
- Most
buildings now have an RCD built into the consumer unit.
This is configured to operate from the mains supply
with an earthed neutral, and not from a generator with
a floating earth. To utilize this protection device,
it is necessary to modify the generator so that it is
configured in the same way as the mains supply.
- This
is a simple modification for a qualified electrician,
involving adding a link wire from the neutral terminal
to the earth terminal. It is recommended to make this
connection in the plug that is to be used to connect
to the generator. This ensures that the generator is
unmodified when it is disconnected from the house, and
therefore remains safe.
- The
plug should be labeled Do not connect to mains:
Neutral-Earth link fitted. The lead between the
generator and the transfer switch is not protected by
the RCD, it is therefore recommended to use a steel
armored cable for this connection. Finally a local low-impedance
earth spike needs to be installed

Model |
SDMO
SH 4000 |
| Kva |
5 |
| Rated
Watts |
4000 |
| Rated
voltage |
230V
/115V |
| Number
Of Sockets |
1x16A
/ 115V
1x16A / 230V |
| Frequency |
50Hz |
| Phase |
Single |
| Engine
type |
Honda
GX 270 OHV 9 HP 4 Stroke |
| Fuel |
Unleaded
petrol |
| Fuel
tank capacity |
13
Ltr |
Continuous
operation
hours (from full tank) |
6.8
Hrs |
| Starting
system |
Recoil
hand starter |
| Dimensions
(LxWxH) |
720
x 560 x 590 |
| Net
weight |
70Kg |
| Noise
level @ 7m |
74dBA |
| Noise
Level EEC |
97
Lwa |
| |
|
|
The SDMO SH4000 is
one of the models in the TECHNIC range, it is aimed at the professional user who
demands more from their generator. Powered by commercial grade Honda engine's,
with over dimensioned exhaust pipes and high autonomy fuel tanks makes this generator
perfectly suitable for the toughest conditions.
Ideal for home back up use:
This generator will run your Central Heating,
Lights And More
Consult table for guide to what your equipment needs to run
The SH4000 will give you 4000 Watts
Fluorescent
Lamp |
60 |
Hair
Dryer |
1500 |
Light
Bulb |
100 |
Washing
Machine |
4,000 |
Video |
100 |
Fan
Heater |
3,000 |
Fridge* |
200 |
Slow
Cooker |
200 |
Radio/Hi
Fi |
200 |
Vacuum
Cleaner |
1500 |
Colour
TV |
250 |
Coffee
Maker |
1,200 |
Central
Heating Pump |
300-800 |
Steam
Iron |
1,250 |
VDU |
300 |
800W
Microwave |
1,500 |
Printer |
350 |
PhotoCopier |
1,600 |
Computer
SH4000 is not suitable for PC |
400 |
Kettle |
2,500 to 3000 |
Deep
Freeze |
700 |
|
|
*Fridge would take 1000 watts on start up then run at approx 200-400 watts |
Everything you need to beat the winter chill
Hurry Buy Now & Save Over £435.00 ex vat
| * Option2 SE2000 +Power Transfer Switch + 14m 16A 230v cable + 16A inlet connector engine oil |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Download Installation Manual for Transfer Switchl
Use Need Acrobat Reader To View This File
Click Button Below If Your PC Does Not Have This

|