Choose from our
quality range of Pumpak Water Pumps & Flood kits
Looking For Other Pumps Then Visit Our Main Water Pump Page
PUMPAK Option 1 |
PUMPAK Option 2 |
PUMPAK Option 3 |
PUMPAK Option 4 |
PUMPAK Option 5 |
TNS 300S 230V Auto
including hose
|
HS 2.4S 110V or 230V Manual including hose
|
LSC1.4S
110V or 230V Manual including hose
|
KS801 230V including hose
|
TDS50HA
including hoses
|
 |
 |
 |
 |
 |
The TS drainage pumps, in polypropylene, are designed for clean and slightly dirty
water use in domestic and some light industrial situations, where low cost is important
|
The HS 24 is a versatile 50mm 2" submersible site drainage pump. This pump has a solid cast aluminium body, cast iron pump casing and an impact resistant PVC strainer base for durability during robust handling.
|
This model will pump water down to 1mm, which makes it suitable for pumping large or small areas of nuisance water found on flat surfaces.
|
The KS801 is a self-priming pump with a plastic body, venturi and impeller. The stainless steel shaft is fitted with a carbon ceramic and NBR mechanical seal and the A.C., TEFV, IP44 motor is fitted with an on/off switch and has overload protection
|
For applications where water contains solids in suspension, centrifugal trash pumps are recommended. The TDS and TED-HA models are self-priming pumps powered by OHV Honda petrol engines with oil alert
|
OUR PRICE
£99.99 ex vat |
OUR PRICE
£199.99 ex vat |
OUR PRICE
£299.00 ex vat |
OUR PRICE
£139.00 ex vat |
|
|
|
|
|
|
| |
DEHYDRO Pumping Kits Electric or Petrol
A DEHYDRO is an emergency pumping kit which has a powerful pump, 2 x packs of Flood Sax Door and discharge hoses for defending a property from flooding. Depending on what kit is selected, the pump is designed to pump water levels down from 3-1mm. Hoses are light, easy to position and feature quick connection to enable fast deployment in the case of an emergency. Supplied in a study easy to carry case, there is sufficient space within to not only store the pumping equipment, but keep other flood protection protection products etc. eg emergency grab bags, emergency meals etc |
Flood Prevention Kit 1 Electric |
Flood Prevention Kit 2 Electric |
Flood Prevention Kit 3 Petrol |
|
|
 |
| Click Here To View More |
Click Here To View More |
Click Here To View More |
1 X BPS100, 230v submersible pump,100 watt motor, weighs 2.5kg, supplied with a quick release hose connector. 10m of power cable and plug for immediate use. It will pump approx 40 litres per minute accross 30m of level ground when using 1" (25mm) hose. There is no initial priming required before starting , it will pump water down to 3mm, but it must not run dry. can be used via a generator or mains
|
1 X LSC1, 230v submersible pump,480 watt motor, weighs 12kg, supplied with a quick release hose connector. 10m of power cable and plug for immediate use. It will pump approx 70 litres per minute accross 30m of level ground when using 1" (25mm) hose. There is no initial priming required before starting , it will pump water down to 1mm, this is an ideal pump as it can be run dry for long periods without harming internal components. It also can be used via a generator or mains |
1 X WX10,Honda engine driven pump, with a 1.5HP engine and weighs 6kgs (dry). This is supplied with a quick release discharge connector,
a 4 metre, quick release suction hose, and a low level suction tool. It will pump approximately 80 litres per minute across 30 metres of level ground, when using 25mm (1”) hose. Initial priming of the pump with water is required before starting, It will pump water down to 3mm, but it must not run dry. |
OUR PRICE: £219.00 ex vat |
OUR PRICE: £439.00 ex vat |
OUR PRICE: £589.00 ex vat |
|
|
|
| |
Looking For Other Pumps Then Visit Our Main Water Pump Page |
